|
Main power supply |
By AC power supply/ ByAC power supply + back-up battery/
By 24V min 20W solar module + 2x 7A 12V batteries in series connected.
Note: the control box is always supplied with an additional toroidal transformer 230-240V /50-60Hz or (110V/60Hz). Select the desired version while ordering)
|
| toroidal transformer's Watts |
105W |
| protection fuse |
√10AF |
| transformer protection fuse |
0,8AT (1,2AT for 110V transformer) |
| use on single or double wing gate |
√ |
| output services |
24V |
| stand-by power consumption |
14 mA |
| radio receiver |
2 channels ( 1 for full cycle opening, 1 for pedestrian access- partial 1 wing opening) |
| remote controls channels storage capacity |
20 codes |
| radio transmission protocol |
DUCATI rolling code |
| radio frequency |
433,92MHz |
| remote control automatic learning |
√ |
| On board antenna |
√ |
| external antenna input |
√ |
| automatic closure working mode |
√ with adjustable pause time up to 100 sec. |
| step by step working |
√ one pulse to open; one pulse to close |
| motor power adjustment |
√ by potentiometer |
| Obstacle detection safety system (DUCO SAFE) |
obstacle detection |
| In compliance with EU-CE norms |
√ |
| timerized courtesy light output |
√ |
| flashing light output |
√ max. 10W 24V lamp. blinks quickly while closing, blinks slowly while opening |
| electric lock output |
√ booster is mandatory by battery/solar panel main power supply |
| safety beam-photocells input (NC contact) |
√ NC normally closed contact Note: use of special low consumption photocells is recommended: use only DUCATI low consumption photocells model 7120 |
| A full cycle START input (NO contact) |
√ |
| pedestrian cycle START input ( NO contact) |
√ |
| Emergency STOP input (NC contact) |
√ |
