KIT: 812-400 Special
MADE IN ITALY
We produce every mechanical component within our company including the electric motor made on an automatic robotic line of maximum precision.
(See also page About us and our technology with videos related to our robotic machines)
Direct sale from the manufacturer. The discount applied is possible as it is a direct sale from the manufacturer without intermediation costs.
THIS KIT OFFERS YOU:
- Certified product and in compliance with all points of the European regulations in force. INTERTEK and NEMKO certifications available on request
- Telescopic pistons for greater leverage and less mechanical effort of the system.
- Motor power regulation
- Automatic reclosing with adjustable time (you can vary the pause time from 1 to 100 seconds) or step-by-step mode
- Pedestrian opening (partial opening of only 1 leaf to allow pedestrian passage) controlled by radio control or wired control.
- Possibility to connect an external courtesy light (e.g. garden light)
- Compatible with 12V electric lock (attention the electric lock is not compatible in the case of operation powered in emergency situations with only the battery)
- Compatible with external battery charger C / M / BAT * and emergency battery * (optional accessories)
- Control unit with integrated emergency battery compartment.
- Automatic locking of the leaves during closing: no electric lock is needed to keep the gate closed.
- Emergency manual release by means of a trefoil key supplied in the kit.
- Safety is guaranteed by an obstacle detection and pressure control system. Photocells are no longer necessary and remain an optional additional non-mandatory accessory (see latest European standards EN13241-1: 2003 + A1 (April2011) EN12453: 2002 EN12445: 2000)
- Installation is quick and easy and requires the intervention of an electrician only to connect the power cable from the 230V mains (or 110V on request)
TECHNICAL SPECIFICATIONS
- Electromechanical worm screw gate opener, irreversible, in low voltage with 12V telescopic actuators
- 230V mains power supply (or 110V on request)
- Operating temperature: -20° C / + 50° C
- Limits of use: see photographs and installation diagram. Max. 2 leaves 3.5m long (total gate 7m) max 700kg
THE KIT CONTAINS:
- 2 x HC412 - 400mm low voltage 12V dc electromechanical actuators complete with fixing brackets and 1m of cable each
- 1 x 7855ROL control unit with toroidal transformer and CTH42S electronic card (integrated rolling code radio receiver)
- 4 x 6203 Roll 2-channel rolling code DUCATI remote controls (over 3 billion combinations for maximum safety)
- 1 x SW5000 key selector
- 1 x HC7500 flashing 12V
- 1 x SW6025 external antenna
- 1 x SW7012 one pair of safety photocells (receiver and one transmitter)
- 1 key for emergency manual release
- 1 12V 7A battery
- 1 C/M/BAT regulator/battery charger accessory
Our company boasts over 30 years of specific experience in the production of low voltage and low consumption electromechanical automations.
Thanks to our energy saving technology, with our products
save up to 80 € / year on your electricity bill compared to competing 230V automations.
Furthermore, our low voltage motors guarantee:
- no risk of electrocution
- maximum efficiency even in humid or extremely hot climates
- maximum safety and motion control
- maximum starting point even at low temperatures
- continuous use without the risk of overheating the engine
- possibility of autonomous use with battery in case of black-out or power failure * (* check on models compatible with battery use)
- Maximum reduction in consumption and consequent savings on bill costs.
- Low environmental impact and environmental protection.
QUALITY, SAFETY AND CERTIFICATIONS TO EUROPEAN STANDARDS
Each of our products fully complies with the latest European regulations in the sector and more precisely:
- ELECTRICAL SAFETY:
European standard LDV EN60335-2-103: 2003 + A11: 2009 / EN60335-1: 2002 + A11: 2004 + A2: 2006 + A12: 2006 + A13: 2008
- Electromagnetic compatibility:
European standard: ETSI EN301 489-3 V1.4.1 ETSI EN300 220-2 V2.3.1 EN62479 (2010)
- SAFETY of operation (anti-crushing)
European standard: EN13241-1: 2003 + A1 (April2011) EN12453: 2002 EN12445: 2000
- RADIOFREQUENCY AND RADIOTRANSMISSION
European standard R & TTE EN300 220-1 / 2
ATTENTION: any product that is not certified according to these regulations is outlawed, and is not safe.
Be wary of products not certified by international bodies, self-certifications do not give the guarantee that the product complies with the regulations.
BEFORE PURCHASING A PRODUCT, ASK FOR A COPY OF THE TEST REPORTS CARRIED OUT IN LABORATORIES OF CERTIFIED BODIES
WARRANTY AND SERVICE
2-year direct manufacturer's warranty. Post-sales assistance in and out of warranty directly with the manufacturer's headquarters. No intermediaries:
Our assistance service is guaranteed through e-mail and telephone assistance. (see warranty chapter for specifications)
