Product no.: PERSY PACK X2B
38Persy 52 is the new wireless automation system for swing shutter window. Made in Italy by Ducati Home. Works powered by battery, recharagable by solar panel or main ac power supply.
• PERSY ® is the wireless opener that allows you to control the opening and closing of your window swing shutters by remote control, smartphone or wired button.
• The reduced overall dimensions of the motor (7cm*) makes it easy to be installaed on almost all type of buildings, guaranteeing the minimum aesthetic impact. (* Check the available "C" measure on your structure to check compatibility and inneed for special curved arm ARKO2 ). CLICK HERE to check the "C" measure
• Powered by the supplied rechargable standard battery. Persy's reduced consumption echnology (0,0002A stand-by absorption only!) it guarantees 8 months autonomy. The battery can be easily recharged in just a few hours by the supplied battery charger.
• Adding the PERSY SOL solar panel to the Persy 52 kit, you can achieve complete energy independence: the small panel always keeps the battery charged.
• Persy can be also be powered by main ac power supply: Main AC power supply must be wired to the battery charger and battery charger wired to Persy's control board. Warning. the back-up battery must be always be kept connected
• You can command a step-by-step maneuver that produces the following sequence: one pulse opens, one pulse stops, one pulse closes.
• By giving an impulse during the maneuver you can stop the shutters in an intermediate position and leave the shutters partially open.
• It is also possible to control the simultaneous closing of all the window shutters
• The irreversibility of the motors keeps the shutters closed, guaranteeing anti-burglary security. To increase protection, it is also possible to add complementary accessories such as the PERSY LOCK (electriclock for windows) or the PERSY-BLOCK (electriclock or bigger doors). Both devices are managed by Persy's electronic board.
• Phase shift makes one of the motors start first How to choose which side has to open first is very simple: on the electronic board just move a switch in the direction of the door that must open first.
• The amperometric detection system, in compliance with the European standards EN 12453, guarantees maximum safety, if the door encounters an obstacle such as a child's hand, the automation recognizes it and immediately stops the movement.
• In case of emergency, just lift the emergency release levers to manually move the doors.
• The installation is very simple and does not require any competence. Anyone can install Persy, it just requires some manual skills. The motors are pre-wired with a special connector to be connected to the board with a simple click.
• Our customer care service via mobile phone / whatsapp / email or chat is always reachable 7/24h to assist customers even during installation. Contact us if you have any questions or to get a quote. Cell / whatsapp 0039-335-1022019 info@apritu.it / info@ducatihome.it
• by simple request it is also possible to get persy in tailored painting. Both motors and profile (standard color: white RAL9010),as well as the arms (standard color: anthracite gray) can be supplied in any color*. *complementary service
THE Persy KIT 52 Contains:
- 2 x 12V electromechanical motorgear in robust die-cast aluminum body, emergency manual release system , electric wiring cable with connector for connection to the electronic board. standard white color (RAL 9010)
-n ° 2 ARKO1 standard curved arms with guides (on request, the special ARKO 2 curved arms can be supplied, mandatory if the measurement C is less than 11.5cm but greater than 7-8cm which is the minimum space necessary to house the motor and profile).
- Motor's fixing anchors
-n ° 1 x 1m Profile for electronic baord and battery containment, length 1 m (in total the length of the system supplied is 140cm: 1m profile + 2 x 20cm each motor) for architraves longer than 140cm it is necessary to add a extra profile. standard white color ( RAL 9010)
-n ° 1 control unit with PR70 electronic board energy saving Ducati technology with stand-by absorption of only 0.0002A, high quality integrated hybrid radio receiver, 2 radio reception channels (step-by-step / total closure) 2 inputs for wired commands (step-by-step / total closure), radio-command self-learning button, electric lock and / or electro-lock input, swich to select the door that opens first, amperometric detection system in accordance with standard EN 12453), power supply input from battery and power supply input for recharging battery / mains supply via power supply. Acoustic warning system for low battery status by buzzer
-n ° 1 ultra flat flat Ducati rolling code radio remote control (FOB) with a special transparent wall support
-n ° 1 rechargeable battery 12V 2.2A commercial battery to be housed inside the profile.
-n ° 1 power supply / battery charger used to recharge the battery of an electric socket when discharging or to power the system from a 230V power supply (the mains must be connected to the power supply unit and the power supply connected to the board always keeping the backup battery)
Ideal stand-alone & fully autonomous stand-alone swing shutter window opener
Works 100% autonomously by a 12V battery. No wiring needed!
The comfort of opening your swing shutters without having to protrude or manually open the window is now within everyone's reach.
In the case of historic buildings or where the expensive cost of an electrical system would discourage many from automating their shutters, Persy® is a unique and intelligent solution.
No wiring required. Very easy stand-alone installation. Direct and easy fastening to the architrave by anchors.
Persy® is fixed in a few minutes to the architrave or the new or pre-existing window frame without any preparation.10 minutes installation, no wiring required: an easy way to automate your swing shutter windows or shutter doors avoiding AC wiring.
Simple installation on almost any pre-existing structures, Persy® adapts to any width of architrave:
from one-sided shutters of min.48 cm, to double-leaf shutters of min.69cm up to the larger shutters.
With only 8cm of side encumbrance, Persy® can be installed on almost all existing structures.
The motors are covered by an adjustable length profile that integrates discretely into any architectural structure.
Safety and tranquility for the whole family
Equipped with an obstacle detection system in compliance with the European EN12453 EN12445 anti-pressure directive, it guarantees the safety of use for the whole family. In the event of contact with an obstacle, movement is immediately interrupted. Anti-intrusion locking system when the doors are closed.
Anti-burglary protection
Persy®, built with the principle of mechanical irreversibility, keeps the shutters locked in open or closed position, offering integrated protection.
For greater protection of your home and families from break-in attempts, you can add the optional Persy-lock, an electric lock that integrates perfectly into the profile. No visual impact and perfect product aesthetics.
The specific Persy-block electro-bolt guarantees the further security of larger shutters.
Manual release system
In case of need, the shutter can be opened or closed manually: with a simple gesture, the release lever is lifted and manual operation is started, by lowering the lever the traction is restored.
Versatile system management
You can control your automated swing shutters from any Ducati's remote controls. The 2- 4 or 12 channels rolling coded remote controls come with wall support. You can command it also by GSM by a simple call.
The type of management is extremely versatile: you can choose whether to open the individual blinds one at a time or decide to operate the closure of all shutters with just one click from a single device.
An integrated and intelligent system that simplifies your life!
What's Included |
THE Persy KIT 52 Contains: - 2 x 12V electromechanical motorgear in robust die-cast aluminum body, emergency manual release system , electric wiring cable with connector for connection to the electronic board. standard white color ( RAL 9010) -n ° 2 ARKO1 standard curved arms with guides (on request, the special ARKO 2 curved arms can be supplied, mandatory if the measurement C is less than 11.5cm but greater than 7-8cm which is the minimum space necessary to house the motor and profile). - Motor's fixing anchors -n ° 1 x 1m Profile for electronic baord and battery containment, length 1 m (in total the length of the system supplied is 140cm: 1m profile + 2 x 20cm each motor) for architraves longer than 140cm it is necessary to add a extra profile. standard white color ( RAL 9010) -n ° 1 control unit with PR70 electronic board energy saving Ducati technology with stand-by absorption of only 0.0002A, high quality integrated hybrid radio receiver, 2 radio reception channels (step-by-step / total closure) 2 inputs for wired commands (step-by-step / total closure), radio-command self-learning button, electric lock and / or electro-lock input, swich to select the door that opens first, amperometric detection system in accordance with standard EN 12453), power supply input from battery and power supply input for recharging battery / mains supply via power supply. Acoustic warning system for low battery status by buzzer -n ° 1 ultra flat flat Ducati rolling code radio remote control (FOB) with a special transparent wall support -n ° 1 rechargeable battery 12V 2.2A commercial battery to be housed inside the profile. -n ° 1 power supply / battery charger used to recharge the battery of an electric socket when discharging or to power the system from a 230V power supply (the mains must be connected to the power supply unit and the power supply connected to the board always keeping the backup battery) |
---|